Showing 1–16 of 46 results

Muc-Off Carbon Gripper – 75g Tube

$14.99
Add to cart
Muc-Off Carbon Gripper creates friction between carbon fiber clamping areas and lowers clamping torque thus decreasing the chance of fatigue, internal fractures or shortening component life.
  • Keep Carbon parts gripped
  • 'Non slip' surface to surface formula
  • Specifically designed for Carbon Fiber parts

Park Tool BKM-1.2 Hydraulic Brake Bleed Kit ā€“ Mineral Oil

$155.95
Add to cart
The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano, Magura, TRP, Tektro, Trick Stuff, SRAM DB8, Campagnolo, Promax, and Clarks. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. Every part is replaceable and available from Park Tool. Housed in a rugged storage case.
  • BKM-1.2 is built for the rigors of daily commercial use
  • Replacement parts available
  • Brake fluid not included

Park Tool BSH-4 Bladed Spoke Holder: Accepts 0.80-2.0mm Blades

$20.95
Add to cart
The Bladed Spoke Holder is a valuable wheel building and truing aid that securely holds bladed spokes to prevent twisting.
  • Four different sized slots to fit a wide variety of bladed spokes
  • Will hold blades from 0.8mm to over 2mm width

Park Tool CT-3.3 Chain Tool

$41.95
Add to cart
  • Manufacturer Part Number:Ā CT-3.3
  • UPC:Ā 763477002372

Park Tool DAG-2.2 Derailleur Alignment Gauge

$84.95
Add to cart
Park Tool Derailleur Alignment Gauge and straightener for keeping drive train in correct alignment.
  • Gauge bar made of heavy gauge, chrome plated steel
  • Adjusts to fit 20ā€ to 29ā€+ wheels
  • Replaceable threaded tip
  • Upgraded, large inner shaft for added strength*
  • Tighter tolerances for improved accuracy*
  • Improved clearance and reach to fit more frame/hanger combos including low clearance thru axle derailleur hangers*
  • *Compared to DAG-2

Park Tool DT-2 Rotor Truing Fork

$20.95
Add to cart
Specially designed, and precisely manufactured to gently adjust bent or damaged brake rotors.
  • Features two different slot depths laser cut from high quality steel
  • Centered handle is vinyl dipped for comfort

Park Tool FR-5.2 Cassette Lockring Tool

$9.95
Add to cart
  • Manufacturer Part Number:Ā FR-5.2
  • UPC:Ā 763477003485

Park Tool IR-1.3 Internal Cable Routing Kit

$72.95
Add to cart
  • Manufacturer Part Number:Ā IR-1.3
  • UPC:Ā 763477003041

Park Tool PP-1.2 Brake Piston Press

$20.95
Add to cart
The Park Tool PP-1.2 slides between disc brake pads inside the caliper, allowing the user to spread the pads and compress the hydraulic pistons when replacing pads, aligning pads, or performing other service procedures. The PP-1.2 expands the gap between the pads, making it easy to insert the disc between the pads when reinstalling a caliper or wheel. Dual density handle provides a positive grip. Fits into most hydraulic disc brake caliper bodies, including Shimano XTR.
  • The tapered end of the PP-1.2 is 25 mm wide
  • Total insertable length of the tool is 26 mm
  • Thickness of the wedge is 4.1 mm
  • NOTE: Wedge-style piston tools such as the PP-1.2 are not intended for use with brake systems that utilize ceramic pistons, such as Shimano road disc brake calipers.

Park Tool PW-3 15.0mm and 9/16″ Pedal Wrench

$28.95
Add to cart
The PW-3 is made from Cro-Moly steel for a shop quality pedal wrench made to last.
  • Manufacturer Part Number:Ā PW-3
  • UPC:Ā 763477005601

Park Tool PW-5 Home Mechanic 15.0mm Pedal Wrench

$19.95
The Park Tool PW-5 is perfectly designed to securely engage the narrow 15 mm wrench flats found on bike pedals while providing the leverage needed to fully tighten pedals. With a small form factor compared to a shop wrench, the PW-5 Pedal Wrench is perfect for the home workshop or event toolbox. Made from heat-treated spring steel and vinyl dipped for comfort, the PW-5 is built to last.
  • Length: 11.5" (290 mm)
  • Weight: 256 g (9 oz)

Park Tool SAC-2 SuperGrip Carbon and Alloy Compound – 4oz, Tube

$12.95
Add to cart
Park Tool SAC-2 is specifically formulated to help prevent slipping on bicycle seatposts, handlebars, and stems. SAC-2 creates friction between surfaces for an extra-secure grip, while also forming a protective barrier between different materials. Ideal for carbon fiber, aluminum, and steel.
  • 4 oz (113 g) tube
  • NOTE: SAC-2 contains small bits of hard silica. This silica may cause minor cosmetic blemishing on finished surfaces. Do not use SAC-2 on threaded parts or for bearing lubrication.
  • Manufacturer Part Number:Ā SAC-2
  • UPC:Ā 763477006141

Park Tool SR-12.2 Sprocket Remover

$35.95
Add to cart
Sprocket remover/chain whip made from heat treated steel and a molded handle for comfort.
  • 15" long for extra leverage and vinyl coated handle for comfort

Park Tool TL-4.2 Tire Lever Set

$4.95
Add to cart
TL-4.2 tire levers feature a wide flat tip for easy engagement and fast removal of any bicycle tire (including tubeless systems) and a handy spoke hook to keep the lever in place when multiple levers are needed. Perfect for tight beads and tubeless tires. The set of two levers snaps together forming a compact lightweight set that can easily be stored in a saddlebag, jersey pocket, or tool roll.
  • Manufacturer Part Number:Ā TL-4.2C
  • UPC:Ā 763477007827

Shimano TL-BR001 Bleed Syringe Unit

$38.00
Add to cart
Shimano Disc Brake Bleed Kits and Tools
  • Bleed tools for Shimano brake systems
  • Compatible with all hydraulic Shimano MTB / trekking / road bike disc brakes with one-way bleeding
  • Includes syringe, connection hose, hose clip and bleed nipple
  • Manufacturer Part Number:Ā Y13000080
  • UPC:Ā 192790904818

Silca Chain Waxing System

Original price was: $99.00.Current price is: $79.20.

The Ultimate Chain Waxing SystemĀ is your compact at-home kit for immersive waxing of chains. The wax warmer, drip stand, and cable coupler are included to make you ready-to-roll for having the cleanest, quietest and most efficient drivetrain possible.

The wax melter has a vented clear lid to retain heat while being able to verify the wax is fully melted.Ā  Perfect companion for StripChip to wax your chain in a single, no degreaser, step.Ā Ā 

The chain hanging stand allows for a no mess drying period where you can allow excess wax to drip right back into the pot to use for the next application.Ā  The notched base retains the melter in place and holds the chain coupler securely in place.Ā Ā 

The chain coupler has a steel cable that is threaded on one side allowing it to be looped through your chain and secured on the other side.Ā  Dip your chain in the wax, agitate, and hang all without getting wax anywhere you don't want it or touching a pot of hot wax.