{"product_id":"park-tool-ctp-c-replacement-chain-tool-pins-card-of-2","title":"Park Tool CTP-C Replacement Chain Tool Pins - Card of 2","description":"\u003ch2\u003eNew Life for a Broken Chain Tool in the Park Tool CTP-C\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003ePark Tool CTP-C\u003c\/strong\u003e is a card of two replacement drive pins for Park Tool chain tools, and it is the part that turns a dead chain tool back into a working one. The pin is the piece that actually pushes the rivet out of the chain, so it carries the whole load and it is the first thing to bend or snap. Pins are \u003cstrong\u003ehardened alloy tool steel\u003c\/strong\u003e. Swapping one takes a \u003cstrong\u003e7 mm or 9\/32 inch box end wrench\u003c\/strong\u003e and about a minute.\u003c\/p\u003e\u003cp\u003eIt fits the \u003cstrong\u003eCT-1, CT-2, CT-3, CT-3.2, CT-3.3, CT-5, and CT-7\u003c\/strong\u003e. Park Tool's own compatibility list is broader than the one printed on the card, which names only the CT-2, CT-3, CT-5, and CT-7, so go by the list above. We stock the CT-3.3 and the CT-5 at the lab, so if either of those is the tool on your bench, this is the pin for it. Buying a card of two rather than a single pin is the sensible move, because the second one lives in the tool roll and turns the next failure into a two minute stop.\u003c\/p\u003e","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":52892486205752,"sku":"CTP-C","price":4.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8435\/3592\/files\/park-tool-ctp-c-replacement-chain-tool-pins.jpg?v=1788275379","url":"https:\/\/dialedcyclinglab.com\/products\/park-tool-ctp-c-replacement-chain-tool-pins-card-of-2","provider":"Dialed Cycling Lab","version":"1.0","type":"link"}