Shimano Deore SM-RT56 - 180mm | 6-Bolt

Shimano Deore SM-RT56-M - 180mm | 6-Bolt Shimano

Shimano Deore SM-RT56 - 180mm | 6-Bolt

Shimano Deore SM-RT56 - 180mm | 6-Bolt

Shimano logo

When Is the Shimano Deore SM-RT56 180mm the Right Rotor?

The Shimano Deore SM-RT56 is a 180mm 6-bolt disc brake rotor designed for consistent stopping power in all riding conditions, spec'd for the Deore M6000 component family and compatible Shimano disc brake systems. The SM-RT56 uses standard stainless steel construction with a tightening plate design that makes installation quick and secure -- the plate locks the rotor bolts firmly in place once tightened, preventing loosening under vibration and impact over time. One important spec to know: the SM-RT56 is designated for resin pad use only, so it should not be paired with sintered metal pad compounds.

At 180mm, the SM-RT56 provides more stopping power and thermal mass than 160mm, suitable as a front upgrade for trail and trekking riders who need more braking authority from their Deore hydraulic disc setup. The 6-bolt ISO interface is compatible with all standard 6-bolt hubs, giving broad wheel compatibility without requiring a center lock hub. Available in 160mm and 180mm -- DCL stocks the 180mm. Compatible with Shimano Deore M6000 and compatible Shimano hydraulic disc brake systems using standard 6-bolt hubs, and cross-compatible with other Shimano MTB caliper families at the same mounting standard. Use with resin pads only.

Sale
$23.99
$23.99 $26.99
Shipping calculated at checkout.

3 in stock

  • Orders over $100 ship free!
  • Estimated delivery: May 24 - May 28

Ask a question

The fields marked * are required.

more details:

Shimano logo

Specifications

  • Model: SM-RT56
  • Series: Shimano Deore
  • Size: 180mm
  • Mount: 6-Bolt (ISO)
  • Construction: Standard stainless steel with tightening plate
  • Pad Compatibility: Resin pad only -- not compatible with metal/sintered pads
  • Compatible Systems: Shimano Deore M6000 and compatible Shimano hydraulic disc brakes on 6-bolt hubs

FAQ

Why is the SM-RT56 designated for resin pads only?

Shimano designates the SM-RT56 for resin pad use because its rotor metallurgy and surface finish are optimized for resin compound friction characteristics. Running sintered metal pads on a resin-only rotor can cause accelerated rotor wear and inconsistent braking. Use resin pads -- B05S-RX, G05A-RX, or equivalent -- with this rotor.

Can I run the SM-RT56 with higher-tier Shimano calipers like SLX or XT?

Yes. Shimano disc rotors are broadly cross-compatible across caliper tiers. The SM-RT56 will work with SLX, Deore XT, and other Shimano MTB hydraulic disc brake calipers using standard 6-bolt hubs. Remember to use resin pads only.

Do I need an adapter to run a 180mm rotor?

You may need a post-mount caliper adapter if your frame or fork was spec'd for a smaller rotor size. Check your frame and fork documentation for the maximum supported rotor size and required adapter before ordering.

Best For

Trail and trekking riders on 6-bolt hubs running Shimano Deore or compatible hydraulic disc brakes who want more braking power in the front position with resin pads and a quick-installing tightening plate rotor design.

Shimano Deore SM-RT56 - 180mm | 6-Bolt Reviews:

You may also like