-
Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated tips and shafts.
-
The fastest, easiest, and most secure way to repair a cut or worn tire sidewall. The TB-2 is produced using a strong, waterproof vinyl membrane with fiber weave reinforcement. A super strong pressure sensitive adhesive assures the boot stays in place in any tubed tire, road or mountain, high or low pressure. A true ride saver.
-
Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated tips and shafts.
-
Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated tips and shafts.
-
Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service. Park Tool Spoke Wrenches are vinyl coated in one of five colors indicating the size at a glance.
-
Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service. Park Tool Spoke Wrenches are vinyl coated in one of five colors indicating the size at a glance.
-
Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service. Park Tool Spoke Wrenches are vinyl coated in one of five colors indicating the size at a glance.
-
Unique four-sided design provides extra strength and support and helps prevent slipping and deformation of aluminum nipples. Uses the same world famous design and high quality materials as our three-sided spoke wrenches.
-
Park Tool's polyurea lubricant was developed specifically for bicycle maintenance and repair. PolyLube 1000™ has an extremely high shear strength to protect vital parts under extreme conditions. PolyLube 1000™ also repels moisture and is compatible with conventional greases.
-
Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated tips and shafts.
-
- Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels
- The FR-4 has 20 splines and is approximately 21.6mm in diameter
- Center bore for axle clearance is 10mm
- Always use a skewer or axle nut to hold tool firmly in place during removal
-
- Base size for socket or wrench is 1" or 25.4mm
- Center bore for axle clearance is 15mm
- Always use a skewer or axle nut to hold tool firmly in place during removal
-
This take-along multi-tool combines two essential cutlery designs — "fork" and "spoon" — into one convenient dining implement. Made of 316 food-grade stainless steel and vinyl dipped in world famous Park Tool Blue. Perfect for your toolbox or backpack.
-
Park Tool Pin Spanners have been designed to give maximum usefulness and versatility at the lowest possible cost. Tough, high carbon tool steel is used on each tool to ensure long life. Handle is vinyl coated to give a good grip. Each Pin Spanner is color-coded for easy recognition.
-
- Manufacturer Part Number: FR-5.2
- UPC: 763477003485
-
- Fits adjusting cone on most gear clusters
- Color-coded red handle for easy identification
-
- Fits older Suntour® two-notch freewheels
- Two notches are approximately 25mm across measured outside to outside
- Center bore for axle clearance is 10mm
- Always use a skewer or axle nut to hold tool firmly in place during removal
-
The BBT-4 is compatible with the following sealed cartridge bottom brackets:
- Campagnolo®
- Veloce™
- Xenon™
- Mirage™
- Daytona™
- Avanti™
- Campagnolo®
-
- 2mm, 2.5mm, and 3mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
-
Park Tool introduced the bicycle world to the three-way wrench over 40 years ago. Our Y-shaped wrenches fit perfectly in the palm of your hand and provide excellent leverage, making them a favorite of mechanics in bike shops worldwide. The ergonomically-shaped tool body features a glass fiber reinforced polymer center. Each wrench is made from heat-treated industrial tool steel for long life, with chamfered tips for a perfect fit. The TWS-3 features three of the most popular star driver fittings found on modern bicycles, allowing adjustment of disc rotor bolts, chainring bolts, and hydraulic brakes.
-
HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components.
-
- 4mm, 5mm, and 6mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Ball end tips to access hard-to-reach areas
- NOTE: Ball end tips are not intended for high torque situations.
-
- Includes 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm hex wrenches
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
-
Features include
- Chamfered tips
- Tight tolerances,
- Portable tool holder.
- 1.5, 2, 2.5, 3, 4, 5 and 6mm hexes.
-
NOTE: The MLP-1.2 does not work on traditional 2 and 3-piece master links (shown in the images) commonly found on single speed or 3-speed bicycles that use a single rear sprocket. These style of master links have the two pins attached on one side plate and use a side plate that clips on or a side plate and a spring clip to hold the opposite plate on. To remove this type of master link, use a needle nose pliers to slide the spring clip off, remove the outer plate and then remove the side with the two pins or remove the single side plate.
-
This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special V-shaped handle, and super strong replaceable pin make chain removal and installation a breeze.
-
- Specifically designed to remove crank arms from splined Shimano® Octalink® and ISIS Drive™ bottom bracket spindles that do not use a self-extracting system
- 22 x 1 mm fine thread provides leverage needed to remove tight crank arms
- Strong rotating tip system ensures smooth operation and long life
-
- Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles
- Fits Power Spline™ cranks from SRAM® using the 8mm thread bolt
- Fits BNI cranks on Bosch® e-bikes
- Strong rotating tip system ensures smooth operation and long life
-
This spanner uses hardened, replaceable pins nominally 2.2mm in diameter.
-
The CT-5 Chain Tool performs like a shop-quality tool, in a lightweight compact size that easily fits in a saddle bag or mobile mechanic's tool roll. The CT-5 removes and installs pins on all 5-to-12-speed derailleur chains, including SRAM AXS 12-speed. The integrated shelf is useful for loosening tight links on older style chains. The fine thread, special V-shaped handle, and super strong replaceable pin (part #CTP) make chain replacement a breeze.
-
The Park Tool PP-1.2 slides between the brake pads inside a caliper allowing the user to spread the pads and compress the pistons when servicing pads or wheels. The PP-1.2 expands the gap between the pads, making it easy to insert the disk between the pads when reinstalling a caliper or wheel. "Sure Grip" dual density handle provides a positive grip. The PP-1.2 fits Shimano® XTR® caliper bodies.
-
Specially designed brushes for cleaning hard to reach areas on most bicycles.
- BCB-4.2 is four-piece brush set designed specifically to clean bicycles
- Ergonomically designed and featuring dual density, sure grip handles
- Includes: 1 GSC-1 Gear Clean Brush, 1 Tapered Detail Brush, 1 Frame Cleaning Sponge/Bristle Brush, 1 Soft Bristle Soaping Brush
-
- Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes
- Wrench tips are precision chamfered for a clean, tight fit
- Made from through-hardened industrial quality steel
-
With the Park Tool CC-2 Chain Checker you can quickly and accurately determine the wear (or "stretch") of nearly any bike chain. Simply insert the Chain Checker’s pins into two links, lightly press the swing arm gauge, and then check the gauge window for an accurate reading. The CC-2 is compatible with most single-speed and derailleur chains, including Shimano XTR 12-speed chains.
-
Quickly and accurately determine the wear and elongation of any chain.
-
Professional quality 6" needle nose pliers with five different crimping/grasping areas and a cutting blade. Forged, heat-treated cro-moly steel with an invisible spring and soft touch dual density grips.
-
New information and topics included in the BBB 4th edition:
- 12-speed and 1x drivetrains
- Tubeless tires
- Disc brakes
- Electronic shifting
- New wheel building content
- Updated headset and bottom bracket standards
- Updated torque specifications
- Updated troubleshooting tables
-
A set of three unique, multi-purpose picks ideal for a wide variety of detail work.
-
- Two 15mm wrench openings at 30 degree and 45 degree angles for best mechanical advantage, regardless of pedal position
- Round vinyl dipped handle won’t dig into the hand like flat wrenches
- Extra long 14" handle provides the leverage to remove even the tightest pedals
-
A professional quality shop chain tool that works with 1/8", 3/16" single speed chains and 5 to 12-speed / 3/32" road and mountain bike derailleur chains* including SRAM® AXS® 12-speed, Shimano® 12-speed chains and Campagnolo® 13-speed chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). Works with single speed half-links.
-
The MTC-40 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along.
-
- Cold forged, heat treated steel handles for strength
- Precision ground cutting jaws for a clean cut on every cable
- Built in crimper for cable end caps and forming hole for reforming housing ends and housing ferrules
- Wire latch holds handles together when not in use