- Manufacturer Part Number: CT-3.3
- UPC: 763477002372
Component Tools
-
- Manufacturer Part Number: FR-5.2
- UPC: 763477003485
-
- Manufacturer Part Number: IR-1.3
- UPC: 763477003041
-
- Brand: SRAM
- Manufacturer Part Number: 00.5318.015.001
- UPC: 710845768248
-
- UPC: 710845907401
- Manufacturer Part #: 00.5318.045.003
- Without Fluid
-
- Manufacturer Part Number: 00.5318.031.001
- UPC: 710845871399
-
Professional Brake Bleed Kit intended for use with Dot Fluid only.
- Manufacturer Part Number: 00.5318.016.002
-
Sale!Includes:
- 1 Head Tube Drift Includes
- 1 Headset Cup Drift
- 1 Adjustable Press Stop
- 1 Threaded handle Includes on 1/2"-13x17" UNC Threaded Rod
-
This CNC machined, 4-in-1 spoke wrench and valve extender tool can restore a wheel knocked out of true, and change a valve extender during a flat repair.
-
NOTE: The MLP-1.2 does not work on traditional 2 and 3-piece master links (shown in the images) commonly found on single speed or 3-speed bicycles that use a single rear sprocket. These style of master links have the two pins attached on one side plate and use a side plate that clips on or a side plate and a spring clip to hold the opposite plate on. To remove this type of master link, use a needle nose pliers to slide the spring clip off, remove the outer plate and then remove the side with the two pins or remove the single side plate.
-
- Secure, non-slip engagement
- Self-adjusting from 10T to 26T cogs
- Suitable for 1-12 speed Sram, Shimano and Campagnolo drivetrains*
- Self-adjusting arms make cassette removal fast and easy
- Closure lock keeps tool closed and compact when not in use
- Cold-forged and hardened CRV tool steel arms prevent flex
- Overmolded file tread handles promote control and comfort during challenging work
- Found in the Team Edition Tool Kit
- Limited Lifetime Warranty
-
- Two 15mm wrench openings at 30 degree and 45 degree angles for best mechanical advantage, regardless of pedal position
- Round vinyl dipped handle won’t dig into the hand like flat wrenches
- Extra long 14" handle provides the leverage to remove even the tightest pedals
-
Forged steel construction with a spring loaded return and comfortable dual density grips.
-
- Cold forged, heat treated steel handles for strength
- Precision ground cutting jaws for a clean cut on every cable
- Built in crimper for cable end caps and forming hole for reforming housing ends and housing ferrules
- Wire latch holds handles together when not in use
-
The BBT-4 is compatible with the following sealed cartridge bottom brackets:
- Campagnolo®
- Veloce™
- Xenon™
- Mirage™
- Daytona™
- Avanti™
- Campagnolo®
-
The Park Tool PP-1.2 slides between the brake pads inside a caliper allowing the user to spread the pads and compress the pistons when servicing pads or wheels. The PP-1.2 expands the gap between the pads, making it easy to insert the disk between the pads when reinstalling a caliper or wheel. "Sure Grip" dual density handle provides a positive grip. The PP-1.2 fits Shimano® XTR® caliper bodies.
-
- Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles
- Fits Power Spline™ cranks from SRAM® using the 8mm thread bolt
- Fits BNI cranks on Bosch® e-bikes
- Strong rotating tip system ensures smooth operation and long life
-
- Specifically designed to remove crank arms from splined Shimano® Octalink® and ISIS Drive™ bottom bracket spindles that do not use a self-extracting system
- 22 x 1 mm fine thread provides leverage needed to remove tight crank arms
- Strong rotating tip system ensures smooth operation and long life
-
- Fits older Suntour® two-notch freewheels
- Two notches are approximately 25mm across measured outside to outside
- Center bore for axle clearance is 10mm
- Always use a skewer or axle nut to hold tool firmly in place during removal
-
- Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels
- The FR-4 has 20 splines and is approximately 21.6mm in diameter
- Center bore for axle clearance is 10mm
- Always use a skewer or axle nut to hold tool firmly in place during removal
-
- Base size for socket or wrench is 1" or 25.4mm
- Center bore for axle clearance is 15mm
- Always use a skewer or axle nut to hold tool firmly in place during removal
-
- Forged, hardened CRV tool steel meant for a lifetime
- Two different pedal flat angles for maximum leverage and efficiency
- Angled 15mm axle nut wrench provides clearance away from wheels
- Polished finish will look good for the life of the tool
- Found in our Team Edition and Ride Prep Tool Kits
-
The CT-5 Chain Tool performs like a shop-quality tool, in a lightweight compact size that easily fits in a saddle bag or mobile mechanic's tool roll. The CT-5 removes and installs pins on all 5-to-12-speed derailleur chains, including SRAM AXS 12-speed. The integrated shelf is useful for loosening tight links on older style chains. The fine thread, special V-shaped handle, and super strong replaceable pin (part #CTP) make chain replacement a breeze.
-
- Fits adjusting cone on most gear clusters
- Color-coded red handle for easy identification
-
The BKM-1 Hydraulic Brake Bleed Kit will bleed most models of mineral oil based hydraulic brakes. Hydraulic systems need bleeding to remove any air bubbles and to inject new, clean fluid.
-
Elite Mineral Oil Bleed Kits feature premium syringes and components designed for the professional mechanic.
-
Unique four-sided design provides extra strength and support and helps prevent slipping and deformation of aluminum nipples. Uses the same world famous design and high quality materials as our three-sided spoke wrenches.
-
This spanner uses hardened, replaceable pins nominally 2.2mm in diameter.
-
A professional quality shop chain tool that works with 1/8", 3/16" single speed chains and 5 to 12-speed / 3/32" road and mountain bike derailleur chains* including SRAM® AXS® 12-speed, Shimano® 12-speed chains and Campagnolo® 13-speed chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). Works with single speed half-links.
-
This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special V-shaped handle, and super strong replaceable pin make chain removal and installation a breeze.