-
The Lezyne Pocket Drive Mini Pump, Fully CNC Machined aluminum body with a highly efficient overlapping handle and detailed machining for extra grip. Short hose section helps save valves from bending forces when in use.
-
Finally, the solution to protecting your disc brakes during maintenance or transit is here! Our Patented design makes life easy, they are fast and easy to use and help to ensure you won’t have protectant or lube overspray on your discs. The end is nigh for loss of braking power from protectant overspray! Finally! Please do not use when transporting your bike on the outside of your vehicle
-
- Constructed from heat treated steel for durability and long term use
- Plastic body for comfort
- Comes with a lifetime warranty
-
SPORT MECHANIC BIKE REPAIR STAND [BIKE WORK STAND]
Part #16413
The Sport Mechanic Bike Repair Stand prioritizes the most critical aspects of the entire Feedback Sports bike repair stand lineup – compatibility, stability, durability and portability. The 360-degree rotating clamp uses a spinner knob closure that can accommodate up to 1.9″ (4.8cm) and support 65lbs (29.5kg). Plus, the Sport Mechanic leverages the same 54″ (137cm) wide base, with rubber-coated end caps, for amazing stability on any surface. And when the service day is done, it folds in to a compact unit for storage or travel. Add an available Travel Bag and a Tool Tray for the optimal bike maintenance setup. -
This CNC machined, 4-in-1 spoke wrench and valve extender tool can restore a wheel knocked out of true, and change a valve extender during a flat repair.
-
NOTE: The MLP-1.2 does not work on traditional 2 and 3-piece master links (shown in the images) commonly found on single speed or 3-speed bicycles that use a single rear sprocket. These style of master links have the two pins attached on one side plate and use a side plate that clips on or a side plate and a spring clip to hold the opposite plate on. To remove this type of master link, use a needle nose pliers to slide the spring clip off, remove the outer plate and then remove the side with the two pins or remove the single side plate.
-
Specs chain tool 8/9/10/11/12 speed compatible hex wrenches #2, 2.5, 3, 4, 5, 6, 8 length 89mm open wrench 8mm, 10mm screwdrivers Phillips #2, flat #2 spoke wrench #0, 1, 2, 3 torx T-25 warranty Lifetime weight 168g
-
- RW Squeegee
- RW Microfiber cloth
- 2x RW Cleaning Wipes
- RW Install Solution
- Microfiber: 20cm x 20cm
- Squeeege: 10cm x 7cm
-
- 1 Adapter
- Machined aluminum is lighter than brass alternatives
- Rubber O-ring provides a secure seal to prevent air leakage
-
- Secure, non-slip engagement
- Self-adjusting from 10T to 26T cogs
- Suitable for 1-12 speed Sram, Shimano and Campagnolo drivetrains*
- Self-adjusting arms make cassette removal fast and easy
- Closure lock keeps tool closed and compact when not in use
- Cold-forged and hardened CRV tool steel arms prevent flex
- Overmolded file tread handles promote control and comfort during challenging work
- Found in the Team Edition Tool Kit
- Limited Lifetime Warranty
-
- Two 15mm wrench openings at 30 degree and 45 degree angles for best mechanical advantage, regardless of pedal position
- Round vinyl dipped handle won’t dig into the hand like flat wrenches
- Extra long 14" handle provides the leverage to remove even the tightest pedals
-
- Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes
- Wrench tips are precision chamfered for a clean, tight fit
- Made from through-hardened industrial quality steel
-
Forged steel construction with a spring loaded return and comfortable dual density grips.
-
- Cold forged, heat treated steel handles for strength
- Precision ground cutting jaws for a clean cut on every cable
- Built in crimper for cable end caps and forming hole for reforming housing ends and housing ferrules
- Wire latch holds handles together when not in use
-
The BBT-4 is compatible with the following sealed cartridge bottom brackets:
- Campagnolo®
- Veloce™
- Xenon™
- Mirage™
- Daytona™
- Avanti™
- Campagnolo®
-
The Park Tool PP-1.2 slides between the brake pads inside a caliper allowing the user to spread the pads and compress the pistons when servicing pads or wheels. The PP-1.2 expands the gap between the pads, making it easy to insert the disk between the pads when reinstalling a caliper or wheel. "Sure Grip" dual density handle provides a positive grip. The PP-1.2 fits Shimano® XTR® caliper bodies.
-
- Includes 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm hex wrenches
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
-
- Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles
- Fits Power Spline™ cranks from SRAM® using the 8mm thread bolt
- Fits BNI cranks on Bosch® e-bikes
- Strong rotating tip system ensures smooth operation and long life
-
- Specifically designed to remove crank arms from splined Shimano® Octalink® and ISIS Drive™ bottom bracket spindles that do not use a self-extracting system
- 22 x 1 mm fine thread provides leverage needed to remove tight crank arms
- Strong rotating tip system ensures smooth operation and long life
-
New information and topics included in the BBB 4th edition:
- 12-speed and 1x drivetrains
- Tubeless tires
- Disc brakes
- Electronic shifting
- New wheel building content
- Updated headset and bottom bracket standards
- Updated torque specifications
- Updated troubleshooting tables
-
- Fits older Suntour® two-notch freewheels
- Two notches are approximately 25mm across measured outside to outside
- Center bore for axle clearance is 10mm
- Always use a skewer or axle nut to hold tool firmly in place during removal
-
- Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels
- The FR-4 has 20 splines and is approximately 21.6mm in diameter
- Center bore for axle clearance is 10mm
- Always use a skewer or axle nut to hold tool firmly in place during removal
-
- Base size for socket or wrench is 1" or 25.4mm
- Center bore for axle clearance is 15mm
- Always use a skewer or axle nut to hold tool firmly in place during removal
-
- 4mm, 5mm, and 6mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Ball end tips to access hard-to-reach areas
- NOTE: Ball end tips are not intended for high torque situations.
-
Features include
- Chamfered tips
- Tight tolerances,
- Portable tool holder.
- 1.5, 2, 2.5, 3, 4, 5 and 6mm hexes.
-
- 2mm, 2.5mm, and 3mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
-
Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated tips and shafts.
-
Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated tips and shafts.
-
Plug tool for connection and disconnection of Electric wire
-
Designed for long-term use and durability, the Finish Line Mechanic Grip Gloves™ provide the ultimate in grip, protection, and dexterity. These reusable gloves make it easier to work on small, precision bike parts.
-
- Forged, hardened CRV tool steel meant for a lifetime
- Two different pedal flat angles for maximum leverage and efficiency
- Angled 15mm axle nut wrench provides clearance away from wheels
- Polished finish will look good for the life of the tool
- Found in our Team Edition and Ride Prep Tool Kits
-
A set of three unique, multi-purpose picks ideal for a wide variety of detail work.
-
- Transmits interactive signals and power supply to each electronic components by “plug & gap” connection
- Compact and waterproof connector
- Easy to insert into frame
- Cable length 150 mm - 1600 mm
- With cable tie type for built-in cable routing (EW-SD50-I)