Skip to content

Overview

Why Do Cyclists Trust the ZN40 41.8mm 45x45 Bearing?

The Cane Creek ZN40 41.8mm Headset Bearing is a precision replacement for headsets with a 45x45-degree contact angle that require this specific upper-cup sizing. The zinc-coated cartridge design guards against corrosion from road spray and wet-weather riding, while hardened steel balls deliver consistent, smooth steering rotation mile after mile. Getting this bearing right matters because even minor play or roughness at the headset translates directly into vague, imprecise handling on the bike.

The 41.8mm diameter is a common upper bearing size in external and semi-integrated headsets, and this ZN40 is cross-compatible with Cane Creek 110-, 40-, and 10-Series headsets that call for it. If your headset feels loose, creaky, or rough despite proper preload and torque, the bearing is likely the culprit, and this is the correct replacement. Stocking this part means you are never sidelined waiting on a maintenance item that should be a 15-minute fix.

All the specs

MPN BAA1162

Diameter
41.8mm
Contact Angle
45 x 45
Finish
Zinc coated
Type
Cartridge bearing, single
Ball Material
Hardened steel

Works with

  • Cane Creek 110-
  • 40-
  • and 10-Series headsets

FAQ

Good questions

Get to know Cane Creek

There's more to Cane Creek than this one product. Our Cane Creek page has the full Cane Creek lineup we carry and more about the brand.

Visit the Cane Creek page →
Why is 41.8mm a common upper headset bearing size?

The 41.8mm outer diameter corresponds to the EC44 standard used by many external cup headsets. It is one of the most widely used upper bearing sizes in road and gravel headset design.

Does the contact angle need to match my existing bearing exactly?

Yes. The contact angle of the bearing must match the cup and crown race geometry of your headset. Using a 36x45 bearing in a 45x45 headset, for example, will result in incorrect load distribution and premature failure.

How do I install a headset cartridge bearing correctly?

Press or seat the bearing squarely into the cup without cocking it to one side. Do not strike the inner race when pressing. Use a proper headset press or bearing press tool, and confirm the bearing seats flush before tightening the stem.

Reviews

What riders say about the Lab

4.9 ★★★★★ 119 Google reviews of Dialed Cycling Lab Read all reviews on Google ↗
“Paul does a great job. He got my bike I bought from someone there in their town and had it packed and shipped to me in Austin, TX… It got here in perfect condition!”
Scott Phillips · Google review
“Fantastic store. It has everything you may want/need for cycling. Great team. Highly recommend to anyone looking for cycling related things and bike service.”
Google review
“I recently got back into biking and wanted to add some things onto my bike. They had most of what I was looking for in shop… I'm really happy to have found them.”
Google review

Questions about this one?

Not sure on size, compatibility, or whether this is the right one for you? Ask us. A real person here will answer.

You are asking about Cane Creek ZN40 Headset Bearing - 41.8mm | 45 x 45

Goes straight to the Lab with the product you were looking at attached. No newsletter signup.