Skip to content

Overview

Is the ZN40 41mm 36x45 Bearing Right for Your Integrated Headset?

The Cane Creek ZN40 41mm 36x45 Headset Bearing is purpose-built for integrated and internal headset designs that use a 36-degree lower contact angle, a configuration common on modern road and gravel framesets with internal bearing seats. Built with a zinc-coated steel race and hardened steel balls, this bearing delivers corrosion resistance and smooth steering feel through all riding conditions. Getting the contact angle right on an integrated headset is non-negotiable, and the 36x45 geometry matches the cup-to-race interface these headsets require.

At 41mm outer diameter, this ZN40 seats accurately into the lower position of integrated headsets within the Cane Creek 110-, 40-, and 10-Series headset lineup that specify this configuration. Replacing a worn lower bearing in an integrated headset restores the direct, feedback-rich steering feel that disappears when bearings start to show play or roughness. This is the bearing for riders who run modern frame designs and insist on maintaining them to spec.

All the specs

MPN BAA1130

Diameter
41mm
Contact Angle
36 x 45
Finish
Zinc coated
Type
Cartridge bearing, single
Ball Material
Hardened steel

Works with

  • Cane Creek 110-
  • 40-
  • and 10-Series headsets

FAQ

Good questions

Get to know Cane Creek

There's more to Cane Creek than this one product. Our Cane Creek page has the full Cane Creek lineup we carry and more about the brand.

Visit the Cane Creek page →
What headsets use the 36x45 contact angle?

The 36x45 angle is characteristic of integrated and internal headsets, where the bearing seats directly into the frame or fork without a separate cup. Many modern road and gravel frames with internal headset seats use this bearing geometry.

Can I use a 45x45 bearing in a 36x45 headset?

No. The contact angles must match. Installing the wrong angle bearing causes improper load distribution, rapid wear, and potential damage to the frame or fork race surfaces. Always confirm the required contact angle before ordering.

Is a 41mm bearing typically for the lower or upper cup?

In most integrated headset configurations, 41mm corresponds to the lower bearing position, which handles the primary steering loads from the crown race. Confirm with your headset documentation to be certain.

Reviews

What riders say about the Lab

4.9 ★★★★★ 119 Google reviews of Dialed Cycling Lab Read all reviews on Google ↗
“Paul does a great job. He got my bike I bought from someone there in their town and had it packed and shipped to me in Austin, TX… It got here in perfect condition!”
Scott Phillips · Google review
“Fantastic store. It has everything you may want/need for cycling. Great team. Highly recommend to anyone looking for cycling related things and bike service.”
Google review
“I recently got back into biking and wanted to add some things onto my bike. They had most of what I was looking for in shop… I'm really happy to have found them.”
Google review

Questions about this one?

Not sure on size, compatibility, or whether this is the right one for you? Ask us. A real person here will answer.

You are asking about Cane Creek ZN40 Headset Bearing - 41mm | 36 x 45

Goes straight to the Lab with the product you were looking at attached. No newsletter signup.