Skip to content

Overview

Is the ZN40 42/52mm 36x45 Kit Right for Your Headset?

The Cane Creek ZN40 Series 42/52mm 36x45 Bearing Kit delivers both upper and lower integrated headset bearings in a single package, matched and ready to restore your headset to full performance. These zinc-coated cartridge bearings provide a corrosion-resistant barrier against road spray and wet conditions, while hardened steel balls ensure consistent, smooth steering rotation mile after mile. Buying both bearings together as a kit guarantees matched components and removes the risk of running a worn bearing alongside a fresh one.

The 42mm upper and 52mm lower pairing targets integrated headset designs requiring the 36x45 contact angle, and is cross-compatible with Cane Creek 110-, 40-, and 10-Series headsets that specify this configuration. This kit differs from the 41/52mm version by one millimeter in the upper bearing, a dimension that matters for a correct press fit. If you are unsure which kit applies to your headset, measure the outer diameter of your existing upper bearing before ordering. For the rider with a full headset overhaul on the schedule, this kit closes the job cleanly in one shot.

All the specs

MPN BAA1173

Kit Contents
Upper and lower bearing pair
Upper Bearing
42mm
Lower Bearing
52mm
Contact Angle
36 x 45
Construction
Zinc-coated cartridge
Ball Material
Hardened steel

Works with

  • Cane Creek 110-
  • 40-
  • and 10-Series headsets

FAQ

Good questions

Get to know Cane Creek

There's more to Cane Creek than this one product. Our Cane Creek page has the full Cane Creek lineup we carry and more about the brand.

Visit the Cane Creek page →
How is the 42/52mm 36x45 kit different from the 42/52mm 45x45 kit?

The bearing diameters are identical, but the contact angle is different. The 36x45 version is for integrated headsets with an angled lower cup, while the 45x45 is for traditional external headsets. The contact angle must match your headset design exactly.

How do I know which kit applies to my frame?

Check the headset model number against the Cane Creek bearing compatibility chart, or remove your current bearings and measure both the outer diameter and confirm the cup geometry. If unsure, reach out to Dialed Cycling Lab and we can help you identify the correct spec.

What happens if I install the wrong contact angle bearing?

Incorrect contact angle causes improper load distribution between the bearing and cup races. This leads to rapid wear, reduced bearing life, and potential damage to the cup seat surface in your headset or frame. Always confirm the angle before ordering.

Reviews

What riders say about the Lab

4.9 ★★★★★ 119 Google reviews of Dialed Cycling Lab Read all reviews on Google ↗
“Paul does a great job. He got my bike I bought from someone there in their town and had it packed and shipped to me in Austin, TX… It got here in perfect condition!”
Scott Phillips · Google review
“Fantastic store. It has everything you may want/need for cycling. Great team. Highly recommend to anyone looking for cycling related things and bike service.”
Google review
“I recently got back into biking and wanted to add some things onto my bike. They had most of what I was looking for in shop… I'm really happy to have found them.”
Google review

Questions about this one?

Not sure on size, compatibility, or whether this is the right one for you? Ask us. A real person here will answer.

You are asking about Cane Creek ZN40 Series Headset Bearing Kit - 42/52mm | 36 x 45

Goes straight to the Lab with the product you were looking at attached. No newsletter signup.