Enduro 6902 Sealed Cartridge Bearing

Enduro 6902 Sealed Cartridge Bearing Enduro

Enduro 6902 Sealed Cartridge Bearing

Enduro 6902 Sealed Cartridge Bearing

Enduro logo

Is the Enduro 6902 the Right Sealed Bearing for Your Build?

The Enduro 6902 Sealed Cartridge Bearing is a workhorse component built to Enduro's standard design spec, delivering consistent performance across a wide range of bicycle applications including bottom brackets, hubs, and suspension pivots. Mobilux NGLI 2 synthetic grease fills 90% of the bearing interior, providing reliable lubrication across temperature ranges and resisting washout in wet conditions. Dual-lip labyrinth seals keep contamination out without adding excessive drag, striking the right balance between protection and smooth rolling feel.

At 15mm x 28mm x 7mm, the 6902 is one of the most common bearing sizes in cycling, appearing in everything from rear derailleur pivots to wheel hubs and suspension linkages on a wide variety of road, gravel, and mountain bikes. Enduro's tight manufacturing tolerances ensure a precise press fit that stays put and won't creak. For riders who do their own wrenching, keeping a few 6902 cartridge bearings on the shelf means you are never one worn bearing away from a down bike.

$7.75
$7.75
Shipping calculated at checkout.

13 in stock

  • Orders over $100 ship free!
  • Estimated delivery: May 30 - Jun 03

Ask a question

The fields marked * are required.

more details:

Enduro logo

Specifications

  • Bearing Number: 6902
  • Inner Diameter: 15mm
  • Outer Diameter: 28mm
  • Width: 7mm
  • Series: Standard Design
  • Seal Type: Dual-lip labyrinth
  • Grease: Mobilux NGLI 2 synthetic (90% fill)
  • Application: Hubs, BBs, pivots, derailleurs

FAQ

Where is the 6902 bearing commonly used on a bicycle?

The 6902 appears in a huge range of applications including wheel hubs, bottom bracket shells, suspension linkages, rear derailleur pivots, and pedal axles. It is one of the most widely used bearing sizes across all cycling disciplines.

Should I use a standard or Max 6902 for my suspension pivot?

For suspension pivots that see heavy lateral loading, the Enduro Max 6902 is the better choice. The standard 6902 is well suited for hubs, BBs, and lower-stress pivot locations.

How do I know when to replace my 6902 bearing?

Signs of a worn bearing include roughness or grinding when spinning, lateral play, creaking under load, or visible corrosion. When in doubt, replace it -- bearings are cheap insurance against bigger problems.

Best For

Home mechanics and shop techs doing routine bearing replacements across road, gravel, and mountain bikes. The Enduro 6902 is a reliable, correctly-spec standard cartridge bearing for hub overhauls, BB servicing, and any application where the original bearing was a standard 15x28x7mm design.

Enduro 6902 Sealed Cartridge Bearing Reviews:

You may also like