Scott Dropout Hanger Rightside IDS 2 142/RWS12
Derailleur Hangers
Scott Dropout Hanger Rightside IDS 2 142/RWS12
Scott Dropout Hanger Rightside IDS 2 142/RWS12
The Scott Dropout Hanger Rightside IDS 2 142/RWS12 is the genuine replacement hanger for Scott frames built around the IDS 2 dropout system, which covers the Scale, Spark, Genius, Contessa, and Big Ed platforms along with their E-bike counterparts. Read the overview
At a glance
- Dropout system
- Scott IDS 2
- Side
- Right, drivetrain side
- Axle designation
- 142/RWS12
- Thru-axle spacing served
- 12x142, 12x148, and 12x197
Out of Stock
Free shipping on US orders over $100.
- 30-day returns in new condition. Read the return policy.
- Price matching. Found it for less? See how it works.
Overview
Which Scott frames use the IDS 2 142/RWS12 dropout hanger?
The Scott Dropout Hanger Rightside IDS 2 142/RWS12 is the genuine replacement hanger for Scott frames built around the IDS 2 dropout system, which covers the Scale, Spark, Genius, Contessa, and Big Ed platforms along with their E-bike counterparts. Despite the 142 in the name, the same hanger serves frames running 12x142, 12x148, and 12x197 thru-axle spacing, because the RWS12 interface is shared across those widths. This is the right side piece only, meaning the drivetrain side where the derailleur mounts. Scott catalogs it under part numbers 219577 and 219574, and it ships with its screw and axle cap.
A derailleur hanger is engineered to be the weak link on purpose. When the derailleur takes a hit from a rock, a crash, or a shift into the spokes, the hanger bends or breaks so the frame does not, and a bent one is the single most common reason shifting refuses to index no matter how much barrel adjuster you feed it. Because hanger fitment is model specific and rarely interchangeable between brands or even between frame generations, compare this part against your existing hanger before installing rather than going by the model name alone. Keeping a spare in the workshop or the travel kit is the difference between a two minute repair and a ruined weekend.
All the specs
- MPN
- 219577 (also catalogued as 219574)
- Dropout system
- Scott IDS 2
- Side
- Right, drivetrain side
- Axle designation
- 142/RWS12
- Thru-axle spacing served
- 12x142, 12x148, and 12x197
- Frame platforms
- Scale, Spark, Genius, Contessa, Big Ed, and E-bike versions of those platforms
- Includes
- Hanger, screw, and axle cap
- Type
- Genuine Scott replacement part
FAQ
Good questions
Get to know Scott
There's more to Scott than this one product. Our Scott page has the full Scott lineup we carry and more about the brand.
Visit the Scott page →How do I know if this is the right hanger for my Scott?
Compare it directly against the hanger currently on your bike. Hanger fitment is model and generation specific, and the model name alone is not a reliable guide because Scott changed dropout designs across years. If your existing hanger is stamped 219577 or 219574, or your frame uses the IDS 2 dropout with a 12mm thru-axle, this is the correct part. When in doubt, bring the old hanger to the shop and we will match it.
My frame is 148mm Boost, not 142. Is this still the right hanger?
Very likely yes. The 142 in the name refers to the axle designation, not a restriction. This hanger serves Scott frames running 12x142, 12x148, and 12x197 spacing because the interface is shared. Confirm against your existing hanger before installing.
Can I just bend a damaged hanger back instead of replacing it?
You can straighten one to get home, and a hanger alignment gauge does a decent job in a pinch. But aluminum that has been bent and bent back is fatigued, and it will fail again at a worse moment. If the hanger took a real hit, replace it. It is a cheap part protecting an expensive frame.
Why should I keep a spare?
Because hangers are model specific, nobody at a trailhead or a race venue will have yours. A bent hanger with no replacement ends the day. A spare in the travel kit turns it into a two minute repair with a multi-tool.
Reviews
What riders say about the Lab
“Paul does a great job. He got my bike I bought from someone there in their town and had it packed and shipped to me in Austin, TX… It got here in perfect condition!”
“Fantastic store. It has everything you may want/need for cycling. Great team. Highly recommend to anyone looking for cycling related things and bike service.”
“I recently got back into biking and wanted to add some things onto my bike. They had most of what I was looking for in shop… I'm really happy to have found them.”
Questions about this one?
Not sure on size, compatibility, or whether this is the right one for you? Ask us. A real person here will answer.
Goes straight to the Lab with the product you were looking at attached. No newsletter signup.
