Skip to content

Overview

What Is the Shimano BH90-SB Brake Hose Olive and Connecting Insert For?

The Shimano BH90-SB olive and connecting insert is the fitting hardware required to cut and re-terminate a BH90 high-pressure hydraulic brake hose. When a BH90 hose is trimmed to length during brake installation or hose replacement, the olive (compression fitting) and connecting insert must be seated at the cut end before threading the barb fitting into the caliper or lever. Using genuine Shimano OEM hardware ensures a leak-free, correctly torqued hydraulic connection. The tolerances of BH90 fittings are specific, and third-party hardware can compromise the seal. A small but critical consumable for any BH90 brake hose service job.

Compatible with Shimano BH90 brake hose, the hose Shimano uses across its current MTB and road hydraulic disc brakes, from Deore M6100 through XTR and on GRX, 105, and Ultegra road levers. Not compatible with BH59 hose systems, which use different fitting dimensions.

All the specs

MPN Y8JA98020

Model
BH90-SB
Contents
Olive (compression fitting) and connecting insert
Hose Compatibility
Shimano BH90 brake hose only
Brake Compatibility
Shimano hydraulic disc brakes that use BH90 hose
Not Compatible With
BH59 hose systems

FAQ

Good questions

Get to know Shimano

There's more to Shimano than this one product. Our Shimano page has the full Shimano lineup we carry and more about the brand.

Visit the Shimano page →
When do I need the olive and insert?

Every time a BH90 hose is cut to length, a new olive and insert must be installed at the cut end. The original fittings cannot be reused once the hose has been cut or disconnected from a fitting.

Is the BH90-SB different from the BH59 olive and insert?

Yes. BH90 and BH59 are different Shimano hose specs (Shimano rates BH90 rigidity as high and BH59 as standard), and they use different fitting hardware. They are not interchangeable. Use only the hardware that matches your specific hose spec.

Do I need any special tools to install the olive?

Yes. A hose barb insert tool (or carefully used pliers) is needed to seat the insert into the hose end. A complete brake bleed is required after any hose service.

Reviews

What riders say about the Lab

4.9 ★★★★★ 119 Google reviews of Dialed Cycling Lab Read all reviews on Google ↗
“Paul does a great job. He got my bike I bought from someone there in their town and had it packed and shipped to me in Austin, TX… It got here in perfect condition!”
Scott Phillips · Google review
“Fantastic store. It has everything you may want/need for cycling. Great team. Highly recommend to anyone looking for cycling related things and bike service.”
Google review
“I recently got back into biking and wanted to add some things onto my bike. They had most of what I was looking for in shop… I'm really happy to have found them.”
Google review

Questions about this one?

Not sure on size, compatibility, or whether this is the right one for you? Ask us. A real person here will answer.

You are asking about Shimano BH90-SB Brake Hose Olive and Connecting Insert

Goes straight to the Lab with the product you were looking at attached. No newsletter signup.