SRAM Flat Mount Titanium Disc Caliper Bracket Bolts - 32mm

SRAM Bracket Mounting Bolts Titanium T25 - 32mm SRAM

SRAM Flat Mount Titanium Disc Caliper Bracket Bolts - 32mm

SRAM Flat Mount Titanium Disc Caliper Bracket Bolts - 32mm

SRAM logo

What are SRAM Titanium Flat Mount caliper bolts used for?

The SRAM Flat Mount Titanium Disc Caliper Bracket Bolts at 32mm are T25 Torx titanium bolts used to mount flat mount disc brake calipers to frame and fork flat mount interfaces. Titanium hardware at the caliper mounting point is a real weight savings over standard stainless steel bolts on a fastener that sees significant torque and vibration loading — titanium provides the necessary structural strength with lower mass and natural corrosion resistance that makes it well suited for a hardware-grade fastener regularly exposed to weather and road spray. The 32mm length is the standard spec for most flat mount caliper configurations, typically front caliper mounting on road and gravel bikes.

Compatible with SRAM flat mount calipers across the full eTap AXS road hydraulic disc lineup — RED, Force, and Rival — as well as any flat mount caliper using the standard T25 Torx interface. Always use a torque wrench and follow the caliper manufacturer's specified torque value; under-torquing flat mount caliper bolts allows the caliper to shift under braking load, causing pad rub and inconsistent brake feel. If your mounting configuration requires the longer 37mm bolt, that version is also available. These are caliper bracket mounting bolts and are not to be confused with disc brake banjo fitting bolts or rotor mounting hardware.

Sale
$27.99
$27.99 $30.00
Shipping calculated at checkout.

2 in stock

  • Orders over $100 ship free!
  • Estimated delivery: Mar 18 - Mar 22

Ask a question

The fields marked * are required.

more details:

SRAM logo

Specifications

  • Bolt Length: 32mm
  • Material: Titanium
  • Drive Type: T25 Torx
  • Mount Type: Flat mount disc caliper bracket
  • Compatible Systems: SRAM eTap AXS hydraulic disc brakes, RED, Force, Rival; all flat mount calipers

FAQ

How do I know if I need 32mm or 37mm bolts?

32mm is the standard flat mount caliper bolt length for most road and gravel frame and fork configurations. 37mm is used in specific rear caliper or adapter configurations where greater thread engagement is required. Check your frame and fork documentation or measure your existing bolts to confirm the correct length.

What torque should I use for flat mount caliper bolts?

Always follow your caliper manufacturer's torque specification, typically 6 to 8 Nm for flat mount caliper bolts. Use a calibrated torque wrench. Under-torqued flat mount bolts will allow the caliper to shift under braking load, producing pad rub and unpredictable braking performance.

Is titanium strong enough for brake caliper mounting hardware?

Yes. Titanium Grade 5 is used in aerospace and motorsport structural fasteners and exceeds the tensile strength requirements for brake caliper mounting. When installed to the correct torque specification and checked periodically, titanium caliper bolts are fully reliable for disc brake mounting.

Best For

Road and gravel riders upgrading flat mount caliper hardware for weight savings and corrosion resistance. Standard 32mm length covers most front and rear flat mount configurations on road disc frames and forks.

SRAM Flat Mount Titanium Disc Caliper Bracket Bolts - 32mm Reviews:

You may also like