SRAM Disc Brake Hose Kit - Flat Mount | Beveled Banjo | 2000mm

What SRAM brakes use the Flat Mount Beveled Banjo hose kit?

The SRAM Disc Brake Hose Kit in Flat Mount Beveled Banjo format is the correct replacement hose for SRAM road hydraulic disc brakes that use a beveled banjo fitting at the flat mount caliper. Road hydraulic disc calipers using the flat mount standard typically connect the hose via a banjo bolt that seats into a machined, beveled face on the caliper body — this beveled seating surface requires a specifically shaped banjo that is not interchangeable with the standard banjo fittings used on MTB or older post-mount calipers. At 2000mm, the hose provides more than enough length for any road or gravel bike frame routing and is cut to the correct length during installation. All hardware needed for a complete connection at lever and caliper is included in the kit.

Installing a replacement hose on a flat mount road hydraulic caliper requires proper cutting, barb insertion, olive compression, and a complete DOT fluid bleed — the same full hose replacement procedure as MTB hydraulic brakes. Using a dedicated hose cutting tool is strongly recommended to ensure a clean, square end that seals correctly at the fitting; an angled or irregular cut at the barb can cause air ingestion and a soft lever that bleeds cannot resolve. Verify your caliper uses the beveled banjo flat mount fitting before ordering — SRAM road hydraulic disc calipers span multiple generations with different fitting types. If your caliper uses a Stealthamajig-style compression fitting instead of a banjo, the Stealthamajig hose kit is the correct product.